Guitar | Bass | Keyboard | Microphones | Mixers | Audio Interfaces | Monitors | Sequencers | Soft Synths | Live Sound | Drums | Club  | Accessories | Blowouts
 SameDay Music   shop at zzounds!

Guide | Rigs | Forums | Reviews | Bookstore | Jukebox | BlogsSearch  |  Mobile  

Tweak's Guide
to Recording



For Noobs

MIDI Basics

Audio Basics

Studio Rigs

Studio Pics

Past Studios

Signal Flow

System Guide

Mac vs. PC

Audio Interfaces


Install Issues

Buy Gear 

Writing Music





CC Events

MIDI Routing


Understanding your Mixer

Digital Mixers

Analog Mixers

Mixer Hookup

Control Surface


Mic Preamps



MIDI Modules




Soft Samplers

Soft Synths

Audio Plugins

Synth Prg Tips

MIDI to Audio




Studio Setup

Room Acoustics

War on Hum

Quiet Room

Dual Monitors

DJ studio


16 vs 24 bit

Word Clock


Build a DAW


Record Vocal

Session Tips

Vocal Editing

AutoTune etc

Using EQ


Guitar Tracks

Guitar Tone

Drum Tips

Drum Patterns

Hip Hop Beats





Pan, Vol, FX

Mixing 101

Mix Methods


Field Recorders

Archiving Songs

Make Money

Sound Dev Tips


Audio for Film




Final Exam





Guitar Gallery

Store Links


Multitrack Recorders
Signal Processors
Studio Racks

Computer Music

Audio Interfaces
Soft Synths/
Plugins and FX
MIDI Interfaces
Control Surfaces
DSP Cards


Keyboard Synths
Keyboard Accessories
MIDI Modules
Groove Boxes
Keyboard Controllers
Keyboard Amps
Expansion Boards

Guitars, Amps,
and Effects

Electric Guitars
Guitar Effects
Guitar Amps
Acoustic Guitars
Classical Guitars


Drum Machines
Drum Hardware
Other Drums


Bass Guitars,
Live Sound/PA



Room Acoustics for the Home Studio


How to create a great sounding studio environment in a typical room in your home

by Tweak

One can really delve deep into this subject and a lot of people do. Acoustics is a science. Recording is an art. I try to keep a focus on what will help make better art. After all, I have a home studio.  I make music because it is part of my blood, not to make a platinum record.  If my room is not acoustically textbook perfect, I don't care.  But I do care, to the point of passion, on how things sound in here.  And how I feel in the space where I spend more time than anywhere else on this planet. 

foam and bass trap

Tweak's room is a mixture of bass traps and acoustic foam

So, the critical thing, for me, is to have a good sounding room that enhances what I am doing--recording instruments, vocals, sampling and listening critically while mixing and editing. Lets not forget, listening for pleasure too. Your audio pleasure factor is a good guide. A bad room really grates on my nerves in a short period of time. My ears get tired and I get a headache. Its like eyestrain for the ears. Anyone that has ever painted the walls in an empty room knows what an extremely annoying room sounds like. As you start moving furniture back into the room it starts sounding better. For a music studio, you want to do this in a more exacting way, to make the room actually sound pleasant and friendly to the ear.

All rooms are boxes. It is good to think of them from "outside the box" to get some control over what is happening to sound. Generally, a small room will have more problems than a large open area as sound reflections will be magnified at the frequencies the box. Small rooms need more treatment as sound will bounce around the room, off the walls and ceiling many more times than a larger room. Also a square room is more problematic than a rectangular room, as having the walls the same distance apart can create strong "standing waves". You may have heard that in your room where a particular bass frequency rattles the walls but others do not. If you haven't, pull out a bass and play the scale and you'll find it.

If you have a choice between a square or rectangular room, choose the rectangular one. If you have a choice between a big or small room, go big. Don't put speakers in corners; corners magnify bass. In a rectangular room, I find it sounds better to have the studio oriented where the speakers are pointed in the direction of the wall farthest away, not to the short wall.


High and Upper Mid frequencies

For me the most irritating culprit is the one most easily fixed.  I refer to the room's "pinginess" or "flutter echoes" in the mid and high frequencies.  If you clap your hands and you hear several reflections, you need to add material that will diffuse and trap them, stop them from bouncing back and forth. Acoustic foam works on the high frequencies and will instantly add relief to the ears. Get several some 4x4 panels (or 2x4, which are easier to ship), 3-4 inches thick if possible and hang them up on the walls. How much to add is to me a matter of taste. You don't want to kill all the liveliness of the room or else everything will sound dead and weak.

If you ever experienced a totally "dead room" such as an anechoic chamber, you know that too much deadness is a bad thing. You can hardly hear anything unless it is right in front of you!  It can be disorienting. We need some reflections to hear ourselves properly. When you walk in your studio, you should immediately feel the difference your sound treatment makes in a pleasant way. If it starts feeling like you are in the Twilight Zone, you probably added too much. So the trick is not killing everything, but those frequencies that are exaggerated and annoying.  Some people like to preserve the liveliness of the room as it makes their instruments or voice sound better.  Others want a a more quiet, dry room.  I tend to the latter camp because i do a lot of sampling, but it is really up to what works for you.


Auralex MoPAD Isolation Pad
MoPADs are affordable, easy to implement, and really effective at decoupling your monitors from your room and all its contents. You've gotta get some! Until you do, you'll never know what your recordings really sound like.

For those new to the studio game lets put it out there that egg cartons don't work. Its one of those urban legends that people repeat over and over. Ever try to get about 300 egg cartons to stay on the walls and ceiling? I have, and it took days. It is not an easy job. Its totally disappointing when you find out they don't make any discernible difference at all. The icing on the cake was when they started falling down off the ceiling at a rate of 3-4 a day at unpredictable times.  Newbies!  Don't buy into the myth.


Low end and Low Mid frequencies

Professionals will tell you that controlling the lows is the top priority for treating your studio acoustically.  One thing about foam, it does little to control the buildup of unwanted bass frequencies. Considering that bass traps are often control "broadband" frequencies as well as bass, one could just use several bass traps and only use a minimum of foam to correct whatever high frequency problems are left.   Many pro studios use no foam at all. 

Ready Acoustics C424BG Chameleon Bass Traps (Burgundy)

Controlling the bass is important, because if the room is exaggerating certain bass frequencies, it's almost impossible to tell how much bass is actually in the mix.  You move your head a foot to the left and the bass sounds heavy, move the other way it sounds weak. Too much bass energy also can mask the mid and high frequencies with mud.

The tried and true solutions are to get broadband panels which are often called bass traps made by reputable manufacturers. I'm lucky to have Ethan Winer from on my forums who has educated our community on bass traps. These typically come in 2x4 foot panels and like foam, you add as many as you need. Bass tends to get reinforced in the corners of the room, so that is where treatment may be most advantageous. The corners behind your back are the first corners to treat, then the two behind the monitors. One guy on the forums made his own bass traps and built them right into the walls! Ingenious. Many make their own traps. You'll have to come by to see the pics.

Ok, I can hear some of you "But Tweak I want my bass, all of it!  Why should I try to make it sound weaker?"  Here's why.  We want to hear the bass, not the room, and once to room fills up with bass frequencies, its hard to hear what you have.  As one adds broad band acoustical treatment you'll hear the bass and kick drum get more defined and distinct.  As you record instruments, there will be less unwanted bass in the recording.  Remember the tip from another page:  Bass Kills.


Tips on miking up instruments in a crappy sounding room

My first advice is to fix the room. But if you can't, you might try using a quality dynamic mic rather than a condenser. Most dynamic mics are less sensitive to reflected sound. Condenser mics, however, can be extremely sensitive and can pick up every little sound in the room, including the birds, crickets and distant trains outside your house if you crank the gain enough. The Sennheiser MD421 and ElectroVoice RE20 are great mics, so is the Shure Sm57, given that you have a quality preamp to drive the signal.   You can also setup a vocal booth, or use devices like the SE Electronics Reflexion Filter and the Mic Thing Microphone Isolator by SM audio.


SM Pro Audio The Mic Thing Microphone Isolator
The Mic Thing is a portable multi-purpose acoustic treatment panel suitable for minimizing room artifacts and improving separation during microphone recording sessions. Great for a range of applications including helping to control room ambience, minimizing spill from instrument amplifiers, or even creating temporary control rooms the Mic Thing is certainly one handy thing!


Summing it all

Ok!  I have given you some hard earned tips  on setting up your recording space.  Now go ahead and get going.  Fix those nasties!  Remember that foam alone is not the solution, it really only deals with the higher frequencies.  Then enjoy your room and all it can do for you.  Ah the sweet silence of a quiet studio.  Makes me wax poetic.  Lets quote Gandhi...


Cool Quote:

In the attitude of silence the soul finds the path in a clearer light, and what is elusive and deceptive resolves itself into crystal clearness. Our life is a long and arduous quest after Truth.

Mahatma Gandhi
Indian ascetic & nationalist leader (1869 - 1948)

<insert OM sample>

Aight! Hope you enjoyed that bit of peace.  Now we are going to war, but not one that kills people, thankfully, but a war that can kill your studio as soon as you turn on the power.  Yes, studio fiends, next up is the "War on Hum". 


Give Feedback on this article here:





Go to the Next Class

Go to the Previous Class



Tweak's Articles on Essential Studio Concepts

Hooking Up Audio
MIDI Basics
The Many Functions of MIDI Data
The Audio Interface
Signal Flow Computer-based Studio
Signal Flow of an MPC Hip Hop Studio
Signal Flow of a MultiTrack Studio
Assembling Your Studio Rig
Studio setup in a Nutshell
5 Hot Tips
Building a Quiet Room
Understanding MIDI Interfaces
The War on Hum
Multiple Video Displays
Latency and how to Deal
Word Clock
Everything About Cables
Digital Audio Converters
Bit Depth and Sample Rate
Studio Monitors
Impedance for Musicicans
How to setup a Patchbay
Room Acoustics Basics
Studio Monitors Price List
Acoustic Products
Catalog of MIDI Interfaces


TweakHeadz Lab | Studio-Central | Audio-Pro-Central  Master INDEX  | Store Affiliations | Site Map | Support the Lab | Privacy Policy | 2010